Русский English Узбекча

Contact phone:

+99871 253-49-53

Tools for sanwich panelsprocessing and erection

Use of cut-off machine is not recommended, due to damage of polymer coating of metal cladding Sandwich Panels caused by temperature.

At the construction site, a reciprocating saw is the most convenient tool used for the processing of Sandwich Panels.  

During erection of the panels, you can use an electric Jigsaw instead of reciprocating saw.  The cutting work will be more difficult because of necessity to provide an accurate layout on the back of the panel.  
On completion, all the metal filings must be carefully removed, as they corrode and spoil the appearance of Sandwich Panels.

An electric drill and a screwdriver are used to secure the panels and shaped elements.  

During tabbing the sealant in the joints of panels, it is recommended to use the plunger gun.